ZY8000T Series: Gas, steam, oil, and liquid 4-20mA BUS | MODBUS | FIELD BUS. This high-precision, explosion-proof, intelligent digital pressure transmitter offers direct connection.
The ZY8000 series intelligent transmitter, developed by Shandong Zhongziyi Intelligent Technology Co., Ltd., represents a pinnacle in pressure and differential pressure measurement technology. By integrating the world's leading design philosophies and process technologies, this transmitter adopts state-of-the-art mono-crystalline silicon sensors, which are paired with highly reliable electronic module designs. With precision temperature and linear correction systems, combined with advanced intelligent manufacturing techniques, the ZY8000 series ensures unparalleled precision, stability, and consistency in performance.
The ZY8000 Intelligent Transmitter, a marvel of advanced engineering, integrates a mono-crystalline silicon composite sensor with a modular design. This cutting-edge sensor captures signals, which are then amplified and converted into digital format using a high-speed dual A/D converter. The microprocessor ensures precision by performing linear and temperature corrections on these digital signals.
For transmitters leveraging HART protocol, the unit converts signals into a 4mA ~ 20mA DC superimposed HART signal via a D/A converter. Transmitters compatible with PROFIBUS-PA and FF output full digital PROFIBUS-PA and FF signals directly. The vital measurement data and functional parameters are securely stored in two EEPROMs. Users have the convenience of adjusting parameters directly onsite using three intuitive adjustment buttons, viewing measurement results, fault information, and operational modes on the LCD display. Additionally, parameter configuration is seamlessly achievable through HART, PROFIBUS-PA, and FF protocols.
| Measuring range |
0~100Mpa |
| Accuracy |
0.075%FS,0.1%FS, 0.25%, 0.5% |
| Medium |
Liquid, gas ,steam |
| Range down |
50:1 |
| Response time |
≤90ms
|
| Overload limit |
≤105Mpa |
| Output |
4~20mA DC,PROFIBUS-PA, field bus
|
| Long term drift |
≤±0.1%FS/10years
|
| Ambient temperature |
-30~70ºC
|
| Medium temperature |
-40~100ºC
|
| Protection grade |
IP67 |
| Explosion proof grade |
ExdIICT6Gb,ExiaIICT6Ga
|
| Temperature influence |
≤0.02%FS/ºC(-20ºC~70ºC)
|
| Process interface |
M20×1.5(M)/1/2"NPT(F)
|
| Electrical interface |
2-M20×1.5(F)/2-1/2"NPT(F)
|
| Diaphragm material |
316L,HC,Tantalum,316LGoldplating
|
| Wetted parts |
316L,HC
|
| Housing material |
Aluminum,316SS(selectable)
|
| Sealing ring |
Teflon,Nitrilerubber,Flurorubber,Metalsealingring
|
Transmitter Detail Pictures:
Shandong Zhongziyi Intelligent Technology Co., Ltd. seamlessly integrates the world's most advanced design philosophies and process technologies. By adopting cutting-edge mono-crystalline silicon sensors, high-reliability electronic module designs, precision temperature, and linear correction systems, coupled with intelligent manufacturing technology, we ensure exceptional precision, stability, and consistency.
product.
Our product boasts a comprehensive suite of intelligent diagnostics, simulation, monitoring, local configuration, and diverse communication functions. It is available in complete specifications for liquid materials and adheres to high standards of electromagnetic compatibility and lightning protection. Widely utilized across industries such as electric power, metallurgy, chemical industry, coal chemical industry, petroleum, petrochemicals,
environmental protection, food processing, medicine, building materials, light industry, nuclear industry, and more.
The ZY8000 intelligent transmitter offers a basic accuracy of 0.1% FS, with a highest accuracy of 0.075% FS. Even after a decade of continuous operation, it maintains an impressive 99.9% accuracy, significantly reducing maintenance costs. Its robust metal housing and fully sealed measuring elements withstand extreme chemical and mechanical stresses. The transmitter's outstanding anti-electromagnetic interference capabilities guarantee high stability and reliability.
The ZY8000 features an integrated diagnostic function that monitors its status in real-time. When predefined event thresholds are exceeded, it enters fault alert mode, outputs alert current (3.6mA or 22.8mA), and provides control signals for system interlock and SIS safety systems. During a fault, the LCD display shows 'Err,' identifying and analyzing the faulty unit for streamlined maintenance, repair, and replacement.convenient.
Diagnostic functions can also be initiated via HART, FF, PA, and other communication protocols, with alarms expressed as warning or fault protection currents. The system automatically diagnoses the operational status of the SENSOR, ROM, RAM, EEPROM, and software. Damaged electronic units or measuring elements can be replaced directly on-site without requiring readjustment.
Shandong Zhongziyi Intelligent Technology Co., Ltd.
Located in the vibrant Zibo Science and Technology Industrial Park, Shandong Zhongziyi Intelligent Technology Co., Ltd. spans an impressive 18,000 square meters. We boast a state-of-the-art manufacturing facility, adhering to the highest standards of modern industry.
We are genuinely committed to
the Research & Development,
manufacture,
sales, and unparalleled service of pressure and temperature instruments.
As a standing director unit of the National Pressure Gauge Industry Association, we have proudly obtained the ISO9001 Quality Management System certification. Recognized as a high-tech enterprise in Shandong Province,
we are a premier partner of Rosemount in China. Our technology continually aligns closely with Rosemount's advancements.
With nearly six decades of deep engagement in instrument R&D and production, our factory has amassed significant technological expertise and customer service experience. Our products find extensive applications across Petroleum, Chemical Industry, Papermaking,
Metallurgy,
Medicine,
Food Processing,
Power Generation, and Machinery sectors. Our sales network spans the entire country and extends abroad, earning the trust and favorable reviews from a broad user base.
Our company's core philosophy is encapsulated in our motto: 'Quality First, Customer Foremost.'
We warmly welcome customers to visit our factory, fostering discussions and exploring cooperative business opportunities.
COMPANY AND FACTORY PICTURES:
Packaging & Shipping
We will deliver your ordered products at the earliest date as required by you.
We believe in the power of collaboration and trust that the best teams will always come out on top!
Exhibition Pictures
Actively pursuing international partnerships, we participate in global exhibitions to showcase our innovative solutions.
1, What kind of product do you supply?
Our product includes pressure transmitter, temperature transmitter, level transmitter, pressure gauge, temperature gauge and flow meter.
2,What is your product and technology advantages?
Our factory was built on 1966 with almost 60 years manufacturing and R&D experience. We are also the supper close partner of Rosemount in China. our technology closely keeps following Rosemount. Especially, our remote pressure transmitter technology and stability could be No. one in China.
3, Where is your factory location?
Our factory located in Zibo, Shandong province, China, which is top three instrument production area. And take an area of more than 18000 square meters.
4, Can we visit your factory?
You are always welcome to our factory at any time at your convenience.
5, What is the warranty of your product?
Our product warranty is 12 months from the shipping date, but we provide lifetime maintenance.
6, What are your payment terms?
Now, we can accept 50% down payment and 50% balance payable 5 days before delivery by T/T, west union, PayPal and trade assurance online payment.
7, What kind of certification do you have?
We have ISO9001, CCC, CNAS laboratory accreditation certification, Flame-proof certification and intrinsic safety certification, SIL certificate. ECM certificate, Russia EAC and PAC certificate and several invention patents.
8, How long is your delivery date?
For peak season is 4 weeks and 2 weeks for offseason, but no matter peak or off season we will try our best to meet your requirements.
9, How is your after sales services?
Our products quality enjoy very good quality reputation and has almost no warranty caused by product itself, but we still provide 24/7 online
services for our customer for any installation, commision, running or other problems.
10, How can I send inquiry?
You can send inquiry through our email or cellphone as below:
){kind=link}
){kind=link}