ZY8000T Series: The Pinnacle of Precision - Gas, Steam, Oil, Liquid 4-20mA BUS, MODBUS, FIELD BUS. Experience unmatched accuracy and reliability with our high-precision, straight connection, explosion-proof Intelligent Digital Pressure Transmitter.
The ZY8000 series intelligent transmitter is a marvel of engineering developed by Shandong Zhongziyi Intelligent Technology Co., Ltd. This high-precision intelligent pressure and differential pressure transmitter embodies the world's most advanced design philosophies and process technologies. Featuring a state-of-the-art mono-crystalline silicon sensor and a highly reliable electronic module design, it employs precision temperature and linear correction systems. Combined with our cutting-edge intelligent manufacturing technology, these elements ensure unparalleled precision, stability, and consistency in every unit produced.
The ZY8000 Intelligent Transmitter boasts state-of-the-art mono-crystalline silicon composite sensor technology and a modular design. This advanced sensor amplifies and converts signals through a high-speed dual A/D converter, transforming them into digital signals. Subsequently, linear and temperature corrections are meticulously performed within the microprocessor.
For transmitters equipped with HART protocol, the digital signal is transmuted into a 4mA~20mA DC signal, superimposed with HART communication via the D/A converter. Transmitters integrated with PROFIBUS-PA and FF protocols deliver full digital PROFIBUS-PA and FF signals. The crucial measurement data and transmitter functional parameters are securely stored in dual EEPROMs. Users can effortlessly adjust parameters on-site via three adjustment buttons, while also viewing measurement results, fault alerts, and operational modes on the LCD display. Additionally, parameters can be configured through HART, PROFIBUS-PA, and FF protocols.
| Measuring range |
0~100Mpa |
| Accuracy |
0.075%FS,0.1%FS, 0.25%, 0.5% |
| Medium |
Liquid, gas ,steam |
| Range down |
50:1 |
| Response time |
≤90ms
|
| Overload limit |
≤105Mpa |
| Output |
4~20mA DC,PROFIBUS-PA, field bus
|
| Long term drift |
≤±0.1%FS/10years
|
| Ambient temperature |
-30~70ºC
|
| Medium temperature |
-40~100ºC
|
| Protection grade |
IP67 |
| Explosion proof grade |
ExdIICT6Gb,ExiaIICT6Ga
|
| Temperature influence |
≤0.02%FS/ºC(-20ºC~70ºC)
|
| Process interface |
M20×1.5(M)/1/2"NPT(F)
|
| Electrical interface |
2-M20×1.5(F)/2-1/2"NPT(F)
|
| Diaphragm material |
316L,HC,Tantalum,316LGoldplating
|
| Wetted parts |
316L,HC
|
| Housing material |
Aluminum,316SS(selectable)
|
| Sealing ring |
Teflon,Nitrilerubber,Flurorubber,Metalsealingring
|
Transmitter Detail Pictures:
Shandong Zhongziyi Intelligent Technology Co., Ltd. has seamlessly integrated the world's most advanced design philosophy and process technology. By adopting cutting-edge mono-crystalline silicon sensors, highly reliable electronic modules, precision temperature and linear correction systems, along with intelligent manufacturing processes, we ensure unparalleled precision, stability, and consistency in our products.
product.
Our product boasts comprehensive intelligent diagnosis, simulation, monitoring, and local configuration capabilities, along with a variety of communication functions. It features specifications for liquid materials, top-tier electromagnetic compatibility, and robust lightning protection characteristics. This makes it ideal for applications in electric power, metallurgy, chemical industry, coal chemical industry, petroleum, petrochemicals,
environmental protection, food processing, pharmaceuticals, building materials, light industry, nuclear industry, and beyond.
The ZY8000 intelligent transmitter achieves a basic accuracy of 0.1% FS (up to 0.075% FS at its highest). Even after a decade of continuous operation, it maintains 99.9% accuracy, significantly reducing maintenance costs. Its robust metal housing and fully sealed measuring elements handle extreme chemical and mechanical stresses effortlessly. Additionally, its superior anti-electromagnetic interference capabilities ensure the ZY8000's high stability and reliability.
The ZY8000 incorporates an integrated diagnostic function, enabling real-time status monitoring. Upon detecting fault conditions, it initiates a fault alert mode, outputs alert electric currents (3.6mA or 22.8mA), and provides control signals for system interlocks and SIS safety systems. When faults occur, the LCD display automatically shows an Err message, identifies the faulty unit, and simplifies the maintenance, repair, and replacement process.convenient.
Diagnostic functions can also be initiated through HART, FF, PA, and other communication protocols. Alarms manifest as warning or fault protection currents. The system autonomously diagnoses the operational status of SENSOR, ROM, RAM, EEPROM, and software. If damage occurs to electronic units or measuring elements, the faulty parts can be directly replaced on-site without the need for recalibration.
Shandong Zhongziyi Intelligent Technology Co., Ltd.
Situated in the esteemed Zibo Science and Technology Industrial Park, our company spans over an impressive 18,000.00 square meters. Boasting a state-of-the-art manufacturing facility,
we are passionately committed to
the research and development,
manufacturing,
sales, and service of cutting-edge pressure and temperature instruments.
As a standing director unit of the National Pressure Gauge Industry Association, we proudly hold ISO9001 quality management system certification and are recognized as a high-tech enterprise in Shandong Province.
We are a premier close partner of Rosemount in China, continuously aligning our technology advancements with theirs.
With nearly 60 years of profound expertise in instrument R&D and production, our factory has amassed significant technological prowess and exceptional customer service experience. Our products are widely utilized in industries such as Petroleum, Chemical, Papermaking,
Metallurgy,
Medicine,
Food,
Power, and Machinery. Our sales network extends nationwide and globally, earning trust and high praise from a vast clientele.
The company's core principle is 'Quality First, Customer First.'
We warmly welcome customers to visit our factory and discuss potential business collaborations.
COMPANY AND FACTORY PICTURE:
Packaging & Shipping
We will deliver your ordered products at the earliest possible date as per your requirements.
We firmly believe that the best team will always emerge victorious!
Exhibition Pictures
We are actively seeking international cooperation through global exhibitions.
1, What kind of product do you supply?
Our product includes pressure transmitter, temperature transmitter, level transmitter, pressure gauge, temperature gauge and flow meter.
2,What is your product and technology advantages?
Our factory was built on 1966 with almost 60 years manufacturing and R&D experience. We are also the supper close partner of Rosemount in China. our technology closely keeps following Rosemount. Especially, our remote pressure transmitter technology and stability could be No. one in China.
3, Where is your factory location?
Our factory located in Zibo, Shandong province, China, which is top three instrument production area. And take an area of more than 18000 square meters.
4, Can we visit your factory?
You are always welcome to our factory at any time at your convenience.
5, What is the warranty of your product?
Our product warranty is 12 months from the shipping date, but we provide lifetime maintenance.
6, What are your payment terms?
Now, we can accept 50% down payment and 50% balance payable 5 days before delivery by T/T, west union, PayPal and trade assurance online payment.
7, What kind of certification do you have?
We have ISO9001, CCC, CNAS laboratory accreditation certification, Flame-proof certification and intrinsic safety certification, SIL certificate. ECM certificate, Russia EAC and PAC certificate and several invention patents.
8, How long is your delivery date?
For peak season is 4 weeks and 2 weeks for offseason, but no matter peak or off season we will try our best to meet your requirements.
9, How is your after sales services?
Our products quality enjoy very good quality reputation and has almost no warranty caused by product itself, but we still provide 24/7 online
services for our customer for any installation, commision, running or other problems.
10, How can I send inquiry?
You can send inquiry through our email or cellphone as below:
){kind=link}
){kind=link}