| Customization: | Available |
|---|---|
| After-sales Service: | 24/7 After Sales Services |
| Warranty: | 12 Months From Delivery |
|
Still deciding? Get samples of US$ 400/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment methods: |
|
|---|---|
| Support payment in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Overview
The ZZYS30 vortex flowmeter from Shandong Zhongziyi Intelligent Technology Co., Ltd. represents an advanced and versatile velocity flow instrument designed for a broad spectrum of applications.
Engineered to measure, monitor, and control the flow of liquids, steam, and various gases efficiently, it meets the diverse requirements of modern industries.
Boasting a robust structure, the ZZYS30 is impervious to mechanical vibrations, impacts, and contamination, ensuring long-lasting reliability.
Its innovative design features no moving parts, eliminating wear and tear, and requiring no mechanical maintenance. The low pressure loss, consistent performance, and high accuracy make it an exceptional choice.
Easy to install, the ZZYS30 offers flexibility with its sensor and signal converter, which can be matched and customized as needed.
Product features:
Wide application range, adept at measuring the flow of steam, gas, and liquid.
Superior vibration resistance with zero drift at zero point, effectively neutralizing external vibration influences.
The ZZYS30 also offers integrated temperature and pressure options, providing cost-effective installation solutions for users.
Flexible output options include (0-5) kHz frequency output, (4-20) mA output, or HART/Modbus protocol communication.
Supports Bluetooth communication for convenient parameter setting. It’s wear-resistant, dirt-resistant, maintenance-free, with a long service life and explosion-proof safety features.
Technical Index
Measurement Medium: Gas, Liquid, Steam
Connection Method: Flange Clamp Type, Flange Type, Insertion Type
Caliber Specifications:
Flange Clamping Type: 25, 32, 50, 80, 100 mm
Flange Connection Type Caliber Selection: 100, 150, 200 mm
Flow Measurement Range: Normal measurement flow velocity range Reynolds number 1.5×10^4~4×10^6; Gas: 5~50 m/s; Liquid: 0.5~7 m/s.
Normal Measurement Flow Range: Liquid,
Gas Flow Measurement Range: See Table 2.
Steam Flow Range: See Table 3.
Measurement Accuracy: Class 1.0, Class 1.5
Measured Medium Temperature:
Room Temperature: -25ºC~100ºC, High Temperature: -25ºC~150ºC, -25ºC~250ºC Output Signal: Pulse Voltage Output Signal, High Level: 8~10V, Low Level: 0.7~1.3V; Pulse Duty Cycle: ~50%, Transmission Distance: 100m.
Pulse Current Remote Transmission Signal: 4-20 mA, Transmission Distance: 1000m. Instrument Use Environment: Temperature: -25ºC~+55ºC, Humidity: 5~90% RH at 50ºC. Material: Stainless Steel, Aluminum Alloy.
Power Supply: DC24V or Lithium Battery 3.6V
Explosion-Proof Grade: Intrinsically Safe iaIIbT3-T6, Protection Level: IP65.
PACKING & SHIPPING
We ensure the prompt delivery of your ordered product, adhering to your specified timelines and requirements.
Installation Requirements
Piping condition
The installation of vortex flowmeter requires a certain straight pipe section before and after, and the common situations are as follows (D is the diameter of the pipe) :
1.
The sensor should be installed on a pipe that is horizontal, vertical, or inclined (with the liquid flowing from bottom to top) and has the same diameter as the sensor. There should be a certain length of straight pipe upstream and downstream of the sensor, with the length meeting the requirements of 15-20D for the front straight pipe section and 5-10D for the rear straight pipe section.
2.
The pipe near the liquid sensor should be filled with the liquid being measured.
3.
The sensor should not be installed on a pipe with strong mechanical vibrations.
4.
The inner diameter of the straight pipe section should be as consistent as possible with the sensor diameter. If they cannot be the same, a slightly larger diameter pipe should be used, with an error of ≤3% and not exceeding 5mm. The sensor should not be installed in locations with strong electromagnetic interference, limited space, or inconvenient maintenance. Installation requirements.
5.
Horizontal pipeline installation is the most common method for flow sensors. When measuring gas flow, if the gas being measured contains a small amount of liquid, the sensor should be installed at a higher point in the pipeline. When measuring liquid flow, if the liquid being measured contains a small amount of gas, the sensor should be installed at a lower point in the pipeline.
6.
Sensor installation in vertical pipelines. When measuring gas flow, the sensor can be installed on a vertical pipeline with no restriction on flow direction. If the gas being measured contains a small amount of liquid, the gas flow should be from bottom to top. When measuring liquid flow, the liquid flow should be from bottom to top to avoid additional weight on the probe.
7.
Side installation of sensors on horizontal pipelines. Regardless of the fluid being measured, sensors can be side-mounted on horizontal pipelines, especially when measuring superheated steam, saturated steam, and low-temperature liquids. If conditions allow, side mounting is preferred as it minimizes the temperature impact on the amplifier.
8.
Inverted installation of sensors on horizontal pipelines. This installation method is generally not recommended. It is not suitable for measuring general gases or superheated steam. It can be used for measuring saturated steam and is suitable for measuring high-temperature liquids or situations where pipelines need frequent cleaning.
9.
Installation of sensors on pipelines with insulation layers. When measuring high-temperature steam, the insulation layer should not exceed one-third of the bracket height.
10.
Selection of pressure and temperature measurement points. Depending on the measurement requirements, when pressure and temperature need to be measured near the sensor, the pressure measurement point should be 3-5D downstream of the sensor, and the temperature measurement point should be 6-8D downstream of the sensor.
){kind=link}